If you have a ceiling projection screen at home, in your office, school, or meeting room, you already know how useful it is. But to keep it working well and looking clean, you must take care of it correctly. It’s not hard. You don’t need any fancy tools. Just a bit of care and attention can make a big difference.
Let’s go through it step by step — simple and easy.
Turn Off Everything Before You Start
This step might sound basic, but it’s super important.
- Always turn off the screen before cleaning.
- If it rolls up automatically, wait until it’s fully closed.
- Switch off the power completely.
- Don’t touch anything with wet hands.
Doing this keeps you safe and also protects the screen.
Don’t Use Strong Cleaners
This is where people often go wrong. They think stronger spray equals better cleaning, but that’s not true for screens.
- Never spray cleaner directly on the screen.
- Don’t use window cleaners or alcohol-based stuff.
- Use plain water or a cleaner that’s made for screens.
- Spray the cloth, not the screen.
Evig, an audio visual solutions company, always says gentle cleaning is the best. Strong sprays can leave marks or even damage the screen.
Use a Soft Cloth, Not Paper
Paper towels might look soft but can scratch your ceiling projection screen. Always go for a soft cloth.
- Use a microfiber cloth.
- Wipe gently — don’t press too hard.
- Go from top to bottom in straight lines.
- If it’s just dust, a dry cloth is fine.
There is no need to scrub or rub excessively. Just a light hand is enough.
Keep the Area Around It Clean
Sometimes, even after you clean the screen, it gets dirty again. That’s usually because there’s too much dust in the room.
- Clean the ceiling and nearby walls often.
- Don’t let vents blow directly on the screen.
- Avoid using the screen right after sweeping or dusting.
Evig, an audio visual solutions company, says the cleaner the room, the better the screen stays.
Don’t Touch the Screen with Bare Hands
Touching screens with bare hands is common in classrooms and offices. Some people touch the screen while pointing at something.
- Avoid touching the screen directly.
- Fingerprints are hard to clean and can leave smudges.
- If something sticks to the screen, don’t scrape it off. Use a damp cloth gently.
Keeping hands away is one of the easiest ways to avoid damage.
Use the Screen Properly
If your ceiling projection screen is motorized, don’t pull it down by hand. Let the motor do its job.
- Always use the remote or wall button.
- Wait until it fully opens or closes before using it.
- If you see it rolling unevenly, stop and check it.
Pulling or forcing the screen can break parts inside.
Watch for Heat and Moisture
Screens don’t like extreme conditions.
- Keep them away from heaters or air conditioners.
- Don’t install them in damp rooms like bathrooms or kitchens.
- If you see moisture spots or the screen warping, that’s a sign to fix the room condition.
Evig, an audio visual solutions company, recommends proper placement right from the start to avoid such problems.
Do a Quick Check Every Month
It takes less than five minutes but can save you from big issues.
- Look for spots, lines, or sagging.
- Test if the motor is running smoothly.
- Make sure the screen is rolling evenly.
If anything feels off, it’s better to fix it early than wait.
Final Tip: Ask for Help When Needed
Sometimes, even with all the care, things stop working. That’s okay. It doesn’t mean the screen is broken forever.
If you ever feel unsure or the screen behaves incorrectly, just ask a professional. Evig, an audio visual solutions company, is known for its quality products and great support. They are also the official distributor of Draper in the UAE, which makes the popular Access E Electric Projection Screen.
Final Words
You don’t need fancy stuff to keep your ceiling projection screen in great shape: just a soft cloth, clean hands, and a little patience.
Use it right, clean it gently, and check it occasionally.
Simple care = long life.
That’s it!
